Where are our Non-Slip Coatings used?
Non-Slip Coatings in Industrial Environments
Employing over 12.4mil people, the manufacturing industry falls into the high-risk category of slips, trips, and falls. There are millions of injuries per year due to the unique environment workers operate in. It is the responsibility of every Health & Safety Officer, and Health & Safety Manager to ensure that the correct safety measure is in place, and it all starts with the floors.
If workers can’t move around safely within the workplace, it affects productivity in a big way. In industrial environments, their slippery loading docks, Slippery walkways, and Slippery Stairs, all of which can be avoided by applying the correct Non-Slip Coatings that are suited to the conditions.
Non-Slip Coatings for Loading Docks
A loading dock experiences foot traffic, vehicular traffic, and machinery traffic. It is important to make sure that the Non-Slip Coating that is applied, caters to all types of traffic. With our experience in more than 20 different countries, we have learned that Non-Slip Coatings need to withstand harsh climates, withstand heavy machinery and be effective in wet slippery conditions, dry/dusty slippery conditions as well as be resistant to spillage conditions.
Non-Slip Coatings for Factory Floors
In almost all industrial environments, walkways are marked off so that workers can move easily and safely between workspaces. Normally these areas are painted with a different color floor paint and have a border so that even in poor light conditions, workers are kept in the same walkways. Often, these walkways are slippery because the paint is smooth or of poor quality. We have developed a range of Non-Slip Coatings for factory floors that is resistant to mild acid, fuel, and even brake fluid. To top it all off, our Non-Slip Coatings for factory floors have traction beads in them which can withstand foot and vehicular traffic
Non-Slip Stair Treads for Slippery Stairs
Aside from slippery walkways and slippery ramps, a lot of the time stairs are forgotten and strangely enough, slippery stairs account for the highest amount of inures. We manufacture a range of Fiberglass Resin Products for all types of stairs. These Non-Slip Stair treads can be mounted with fasteners to steel grate stairs or glued to tiled or concrete stairs. In a range of different sizes, with glow-in-the-dark warning strips or not, our Non-Slip Stair Treads can withstand even the toughest conditions.